Edge Connectors
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
	Jamma/Mame finger boards. 0.156 pitch. 2 X 28 way.		£1.35	V0001		94
0.156 standard quality edge connectors.		When ordering, you are buying ONE connector.
	2 x 10 way. Blue. 0.156 pitch.		£2.88	V0006		10
	2 x 22 way. Blue. 0.156 pitch.		£2.60	V0003		22
	2 x 28 way. Blue. 0.156 pitch. Standard Jamma connector.		£3.95	V0002		92
	2 x 36 way. Blue. 0.156 pitch.		£4.28	V0007		32
0.156 High quality edge connectors.
	2 x 10 way. 0.156 pitch. High quality.		£2.56	V0141		0
	2 x 18 way. 0.156 pitch. High quality.		£0.95	V0004		854
	2 x 22 way. 0.156 pitch. High quality.		£5.86	V0139		0
	2 X 24 way. 0.1 pitch. As used on and supplied by Namco system 11 (Tekken etc). The width of the slot may be less than that of the PCB. You may need to file down the width of PCB slightly.		£3.40	V0008		0

'D' type solder bucket plugs and sockets.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
	9 way plug		£0.68	CON0045		Yes
	15 way plug		£0.80	CON0046		Yes
	15 way plug. High density. (PC Monitor).		£3.04	CON0275		Yes
	23 way plug		£1.96	CON0047		3
	25 way plug		£1.24	CON0048		Yes
	9 way socket		£1.17	CON0049		Yes
	15 way socket		£0.74	CON0050		Yes
	15 way socket. High density. (PC Monitor).		£1.29	CON0276		Yes
	25 way socket		£1.05	CON0052		Yes
	9 way hood		£0.36	CON0053		Yes
	15 way hood		£0.66	CON0054		Yes
	25 way hood		£0.68	CON0056		Yes
	Jack posts for 'D' connectors.		£0.27	CON0057		Yes
	'D' type hood cable grommet.		£0.27	CON0058		Yes

The following section has two types of connector. Which type you use depends on which you prefer. The AWG type have all the electrical terminals in place, and you can either push the wire in to the top without cutting of any insulation with a small screwdriver or similar tool. The empty housings are supplied without electrical terminals. You connect the wire to each separate terminal pin. You can crimp with pliers and then solder the wire in place or get a generic crimping tool of which many types are available which usually do the job. Specific crimping tools are very expensive.

0.1 inch, 2.54mm pitch KK connectors. The size is the distance between the centre of each pin.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
0.1 Pin Headers.
	2 way		£0.51	CON0059		Yes
	3 way		£0.53	CON0060		Yes
	4 way		£0.55	CON0061		Yes
	5 way		£0.63	CON0062		Yes
	6 way		£0.93	CON0063		Yes
	8 way		£0.96	CON0064		Yes
	10 way		£1.29	CON0065		Yes
	15 way		£1.58	CON0067		14
	36 way		£1.85	CON0300		Yes
0.1" 2.54mm Pin Headers with locks.
	2 way		£0.59	CON0215		Yes
	3 way		£0.61	CON0216		Yes
	4 way		£0.82	CON0217		Yes
	5 way		£0.93	CON0218		Yes
	6 way		£1.07	CON0219		Yes
	8 way		£1.31	CON0220		Yes
	10 way		£1.48	CON0229		Yes
	12 way		£1.54	CON0230		Yes
	15 way		£2.26	CON0231		Yes
0.1" KK (2.54mm) pitch terminal housing as used on PCB extra button connectors. Terminals (CON0095) Supplied separately.			More information.
	0.1" Crimp Terminal The empty housings are supplied without electrical terminals. You connect the wire to each separate terminal pin. You connect the wire to each separate terminal pin. You can crimp with pliers and then solder the wire in place or get a generic crimping tool of which many types are available which usually do the job. Specific crimping tools are very expensive.		£0.10	CON0095		Yes
	Polarising pins		£0.15	CON0291		Yes
	2 way		£0.22	CON0077		Yes
	3 way		£0.24	CON0078		Yes
	4 way		£0.28	CON0079		Yes
	5 way		£0.32	CON0253		Yes
	6 way		£0.36	CON0081		Yes
	7 way		£0.40	CON0254		Yes
	8 way		£0.42	CON0082		Yes
	9 way		£0.29	CON0255		Yes
	10 way		£0.49	CON0083		Yes
	11 way		£0.37	CON0256		Yes
	12 way		£0.58	CON0084		Yes
	13 way		£0.47	CON0257		Yes
	14 way		£0.48	CON0258		Yes
	15 way		£0.63	CON0085		Yes
	16 way		£0.69	CON0259		Yes
	17 way		£0.63	CON0260		0
	18 way		£0.68	CON0274		Yes
	19 way		£0.75	CON0080		0
	20 way		£0.80	CON0211		Yes
0.1" 2.54mm fitted housing with 22/24 AWG insulation displacement terminals. These have all the terminals in place, where the wires are pushed in the top.			More information.
	2 way		£0.42	CON0203		Yes
	3 way		£0.42	CON0203		Yes
	4 way		£0.64	CON0203		10
	6 way. 22 AWG		£0.58	CON0205		10
	8 way		£1.28	CON0206		Yes
	10 way		£1.59	CON0207		Yes
	12 way		£1.88	CON0208		Yes
	15 way		£1.92	CON0210		20

2.54mm HE14 series. Manufacturer: TYCO ELECTRONICS / AMP.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
	1 x 3 way crimp housing. 281838-3		£0.51	CON0282		8
	1 x 4 way crimp housing. 281838-4		£0.54	CON0278		9
	1 x 4 way straight header. 281695-4		£0.35	CON0286		10
	2 x 5 way crimp housing. 281839-5		£0.99	CON0280		10
	2 x 5 90 way deg. header. 281742-5		£1.45	CON0283		4
	2 x 6 crimp housing. 281839-6		£0.94	CON0281		7
	2 x 6 90 deg. way header. 281742-6		£0.48	CON0287		10
	2 x 8 crimp housing. 281839-8		£0.88	CON0279		8
	2 x 8 way 90 deg. header 281742-8		£0.74	CON02875		7
	Crimp pin. 182734-2 The empty housings are supplied without electrical terminals. You connect the wire to each separate terminal pin. You connect the wire to each separate terminal pin. You can crimp with pliers and then solder the wire in place or get a generic crimping tool of which many types are available which usually do the job. Specific crimping tools are very expensive.		£0.23	CON0284		185

0.156 inch 3.96mm pitch KK connectors. The size is the distance between the centre of each pin.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
0.156 " Round Pin headers.
	2 way		£0.54	CON0117		Yes
	3 way		£0.82	CON0118		Yes
	4 way		£0.74	CON0119		Yes
	5 way		£0.92	CON0289		Yes
	6 way		£1.66	CON0120		Yes
	8 way		£2.06	CON0121		Yes
	10 way		£2.52	CON0068		Yes
0.156 " Square Pin headers.
	2 way		£0.29	CON0232		9
	4 way		£0.63	CON0233		4
	5 way		£0.74	CON0234		6
	6 way		£0.88	CON0235		0
	10 way		£1.27	CON0212		38
	12 way		£1.52	CON0213		28
0.156 " Square Pin headers with locks.
	7 way		£0.15	CON0244		1000+
	12 way		£0.20	CON0250		1000+
	24 way		£3.54	CON0301		Yes
0.156" housing as used on older Williams games.
	0.156" Crimp Terminals 18-24 AWG The empty housings are supplied without electrical terminals. You connect the wire to each separate terminal pin. You connect the wire to each separate terminal pin. You can crimp with pliers and then solder the wire in place or get a generic crimping tool of which many types are available which usually do the job. Specific crimping tools are very expensive.		£0.12	CON0096		Yes
	Polarising pin.		£0.18	CON0293		Yes
	2 way		£0.31	CON0122		Yes
	3 way		£0.33	CON0123		Yes
	4 way		£0.35	CON0124		Yes
	5 way		£0.39	CON0125		Yes
	6 way		£0.54	CON0126		Yes
	8 way		£0.64	CON0127		Yes
	10 way		£0.92	CON0086		Yes
	12 way		£0.94	CON0128		Yes
	14 way		£0.68	CON0130		Yes
0.156" housing fitted with 22AWG insulation displacement terminals. These have all the terminals in place, where the wires are pushed in the top.
	2 way. Man# 3-640428-2		£0.39	CON0172		Yes
	3 way. Man# 3-640428-3		£0.48	CON0297		19
	4 way. Man# 3-640428-4		£0.49	CON0174		6
	6 way. Man# 3-640428-6		£0.61	CON0176		Yes
	8 way. Man# 3-640428-8		£1.09	CON0177		Yes
	10 way. Man# 3-640428-10		£1.58	CON0179		Yes
	10 way dust cover for above		£0.10	CON0292		Yes
	12 way 24 AWG. Use for Williams pinball WC95 general illumination.		£2.84	CON0181		Yes
	SPECIAL. 12 way 22 AWG enclosed plug for above.		£0.20	CON0245		Yes
	SPECIAL. 15 way 18 AWG		£0.60	CON0243		Yes
	15 way dust cover for above.		£0.13	CON0249		Yes
	19-way 22-AWG AMP PN 1-640433-9		£1.65	CON0251		28
	19 way dust cover for above.		£0.10	CON0252		26

0.2 inch pitch connectors. Terminals (CON0096) Supplied separately.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
0.2 inch pitch connectors. The size is the distance between the centre of each pin. Terminals (CON0096) Supplied separately.
	8 way 0.2" pin header. 10-08-1081 Can be cut down to smaller size.		£0.82	CON0074		5
	12 way 0.2" pin header. 10-08-1121 Can be cut down to smaller size.		£1.56	CON0076		10
	0.2" Crimp Terminals 18-24 AWG. The empty housings are supplied without electrical terminals. You connect the wire to each separate terminal pin. You connect the wire to each separate terminal pin. You can crimp with pliers and then solder the wire in place or get a generic crimping tool of which many types are available which usually do the job. Specific crimping tools are very expensive.		£0.12	CON0096		Yes
	2 way 0.2" Housing. 10-01-1024		£0.42	CON0087		4
	3 way 0.2" Housing. 10-01-1034		£0.52	CON0088		1
	4 way 0.2" Housing. 10-01-1044		£0.55	CON0089		24
	5 way 0.2" Housing. 10-01-1054		£0.61	CON0090		6
	6 way 0.2" Housing. 10-01-1064		£0.92	CON0091		7
	8 way0.2" Housing. 10-01-1084		£1.15	CON0092		4
	10 way0.2" Housing. 10-01-1104		£1.20	CON0093		15
	12 way 0.2" Housing. 10-01-1124		£1.45	CON0094		12

Molex (Pin spacing 0.093") Power Connectors. Terminals (CON0109 and CON0110) Supplied separately.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
	The empty housings are supplied without electrical terminals. You connect the wire to each separate terminal pin. You connect the wire to each separate terminal pin. You can crimp with pliers and then solder the wire in place or get a generic crimping tool of which many types are available which usually do the job. Specific crimping tools are very expensive.
	0.093" Crimp plug pin. 14-20 AWG 02-09-2103		£0.12	CON0109		Yes
	0.093" Crimp socket pins 18-24 AWG 02-09-1118		£0.12	CON0110		Yes
	0.093" Plug pin for PCB mounting		£0.24	CON0241		186
	0.093" Socket pin for PCB mounting		£0.24	CON0242		6
	3 way plug. 03-09-1031		£0.38	CON0097		Yes
	3 way socket. 03-09-2031		£0.43	CON0098		Yes
	4 way plug (Rectangle). 03-09-1041		£0.54	CON0099		Yes
	4 way socket (Rectangle). 03-09-2041		£0.60	CON0100		Yes
	6 way plug. 03-09-1061		£0.85	CON0101		Yes
	6 way socket. 03-09-2061		£1.16	CON0102		Yes
	9 way plug. 03-09-1091		£0.82	CON0103		Yes
	9 way socket. 03-09-2091		£0.84	CON0104		Yes
	12 way plug. 03-09-1121		£0.72	CON0105		Yes
	12 way socket. 03-09-2122		£0.77	CON0106		Yes
	15 way plug. 03-09-1151		£1.21	CON0107		Yes
	15 way socket. 03-09-2159		£1.74	CON0108		Yes

AMP "Universal Mate-N-Lok" plugs and sockets. Terminals (CON0170 and CON0171) Supplied separately. Plug and socket will accept either pins. Click for more information.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
	The empty housings are supplied without electrical terminals. You connect the wire to each separate terminal pin. You connect the wire to each separate terminal pin. You can crimp with pliers and then solder the wire in place or get a generic crimping tool of which many types are available which usually do the job. Specific crimping tools are very expensive.
	Crimp plug pin. 20 AWG. 926894-1		£0.18	CON0170		Yes
	Crimp socket pin. 20AWG. 926893-1		£0.18	CON0171		Yes
	2 way plug. 1-480698-0		£0.34	CON0154		Yes
	2 way socket. 1-480699-0		£0.30	CON0155		Yes
	3 way plug. 1-480700-0		£0.32	CON0156		Yes
	3 way socket. 1-480701-0		£0.41	CON0157		Yes
	4 way plug. 1-480702-0		£0.56	CON0158		Yes
	4 way socket. 1-480703-0		£0.55	CON0159		Yes
	5 way plug. 1-480763-0		£0.71	CON0160		Yes
	5 way socket. 1-480764-0		£0.68	CON0161		Yes
	6 way plug. Round.		£0.48	CON0294		8
	6 way plug. 1-480704-0		£0.58	CON0162		Yes
	6 way socket. 1-480705-0		£0.45	CON0163		Yes
	9 way plug. 1-480706-0		£0.50	CON0164		Yes
	9 way socket. 1-480707-0		£0.61	CON0165		Yes
	12 way plug. 1-480708-0		£0.75	CON0166		Yes
	12 way socket. 1-480709-0		£0.78	CON0167		Yes
	15 way plug. 1-480710-0		£1.84	CON0168		Yes
	15 way socket. 1-480711-0		£1.44	CON0169		Yes

AMP "Mini Mate-N-Lok" plugs and sockets. Terminals (CON0185 and CON0186) Supplied separately. Plug and socket will accept either pins.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
	The empty housings are supplied without electrical terminals. You connect the wire to each separate terminal pin. You can crimp with pliers and then solder the wire in place or get a generic crimping tool of which many types are available which usually do the job. Specific crimping tools are very expensive.
	Crimp plug pin. 22-18AWG. 170364-1		£0.14	CON0185		Yes
	Crimp socket pin. 22-18AWG. 170366-1		£0.14	CON0186		Yes
	2 way plug. 172336-1		£0.28	CON0187		Yes
	2 way socket. 172328-1		£0.36	CON0188		Yes
	3 way plug. 172337-1		£0.36	CON0189		Yes
	3 way socket. 172329-1		£0.44	CON0190		Yes
	4 way plug. 172338-1		£0.50	CON0191		Yes
	4 way socket. 172330-1		£0.64	CON0192		Yes
	6 way plug. 172339-1		£0.68	CON0193		Yes
	6 way socket. 172331-1		£0.70	CON0194		Yes
	9 way plug. 172340-1		£0.80	CON0195		Yes
	9 way socket. 172332-1		£0.64	CON0196		Yes
	12 way plug. 172341-1		£0.89	CON0197		Yes
	12 way socket. 172333-1		£0.82	CON0198		Yes
	15 way plug. 172342-1		£0.96	CON0199		Yes
	15 way socket. 172334-1		£1.06	CON0200		Yes

Insulated Crimp Terminals.
	Size in mm:	Order Code	Price Each
Type:			RED 25Amp 0.5-1.5mm. Code -R	BLUE 30amp 1.5mm-2.5mm. Code -B	YELLOW 48Amp 4-6mm Code -Y	BRASS 25Amp. Use solder or special crimp tool. Code -A
Ring.	3.2 hole dia.	CON0001	5p	5p	N/A
	3.7	CON0002	5p	5p	7p
	4.0	CON0003	5p	6p	7p
	5.0	CON0004	5p	6p	7p	Star grip. Click for Picture. 5p
	6.0	CON0005	6p	7p	9p
	8.0	CON0006	N/A	N/A	12p
Open Fork	3.2	CON0007	5p	5p	N/A
	3.7	CON0008	5p	5p	N/A
	4.0	CON0009	5p	6p	8p
	5.0	CON0010	6p	6p	8p
	6.0	CON0011	6p	7p	8p
Male push on	6.3 x 0.8	CON0012	6p	7p	N/A
Female push on.	2.8 x 0.5 Used on Sanwa buttons.	CON0013	5p	N/A	N/A
	2.8 x 0.8	CON0014	5p	N/A	N/A	Click for Picture 4p
	4.8 x 0.5	CON0015	5p	5p	N/A
	4.8 x 0.8	CON0016	5p	6p	N/A
	6.3 x 0.8	CON0017	4p	7p	8p	Click for Picture 4p
Piggyback push on	6.3 x 0.8	CON0018	9p	10p	N/A
Insulated female	4.8 x 0.8	CON0019	8p	9p	N/A
	6.3 x 0.8	CON0020	8p	9p	12p
Pin terminals	1.9 x 12	CON0021	5p	6p	N/A
	2.8 x 14	CON0022	N/A	N/A	11p
Male bullet	4	CON0025	5p	N/A	N/A
	5	CON0026	N/A	6p	11p
Female bullet	4	CON0027	7p	N/A	N/A
	5	CON0028	N/A	8p	12p
Butt splice		CON0029	5p	6p	8p
Nylon crimp cap		CON0030	6p	6p	N/A
Insulated, insulation displacement terminal with series diode. The right picture shows the crimp with the insulation removed for a clearer view	6.3 x 0.8 Amp part number 64432-1	CON0247	N/A	N/A	N/A	8p
Insulated, insulation displacement terminal. The right picture shows the crimp with the insulation removed for a clearer view.	6.3 6.3x 0.8 AMP part number 346431-1	CON0248	N/A	N/A	N/A	5p

Terminal blocks and other connectors.
Click image to enlarge.	Description.		Price Each.	Order Code.		In Stock.
	5 Amp PVC plug and socket.		£4.92	CON0116		Yes
		Terminal blocks. (Sold in strips of 12).
	3Amp PVC		£0.54	CON0111		Yes
	5 Amp PVC		£0.69	CON0112		Yes
	10 Amp PVC		£0.85	CON0277		Yes
	15 Amp PVC		£0.98	CON0113		Yes
	30 Amp PVC		£1.63	CON0114		Yes
Audio and other connectors.
	Phono plugs. Red		£0.20	CON0040		Yes
	Phono plugs. Black		£0.20	CON0041		Yes
	DC Power plug for PSP. OD 4.0mm. ID 1.7mm.		£0.95	CON0288		Yes
	Alligator Clip. Length 50mm. Takes 4mm plugs.		£0.36	CON0044		Yes
	Red Alligator Clip. Length 55mm. Takes 4mm plugs.		£0.40	CON0298		34
	Black Alligator Clip. Length 55mm. Takes 4mm plugs		£0.40	CON0299		35
Mains connectors.
	IEC in line mains socket		£2.74	E0001		Yes
	IEC mains inlet.		£2.48	E0002		Yes
	IEC in line plug		£4.95	E0007		Yes
	Bulgin / Bell Fruit mains plug. Used.		£15.00	E0011		Yes